MPRO Clear is based on the SP320, it is still simple to use and is now better for the environment and the person using it.
Main Product Features
- Easy application
- Excellent clarity
- High film-build
Solvent Free Epoxy
SP 320 is a solvent-free, clear epoxy coating that provides a high clarity, tough finish to whatever it is applied to. When used for coating wood, just a few coats will provide both protection and a depth of clarity that can only otherwise be achieved with many more coats of a conventional varnish.
The epoxy coating will protect most surfaces from moisture ingress, and will also add strength to softwood surfaces. On horizontal surfaces, SP 320 may be poured on as a flow-coat, providing an instant, thick coating layer in just one application. If the coating is to remain unpainted, the cured material should be overcoated with any good two pack polyurethane, since an unprotected epoxy coating will gradually yellow in sunlight.
Due to its low viscosity, and excellent wetting characteristics, SP 320 may also be used with lightweight glass reinforcements, such as RE210D, to provide a clear, sheathing layer. When this is further coated with extra layers of SP 320, the result is a glass-reinforced clear coating which is exceptionally strong and hard-wearing.
Whilst primarily designed as a coating, SP 320 is completely solvent-free and so can be mixed with Gurit's Filler range to produce filling compounds, adhesives and fillet mixes. Some information about the filler range, and how to use the fillers, is contained in the datasheet.
- Coating Coverage (@ 100 microns): Approximately 10m2/litre
- Glue Coverage: Approximately 3-4m2/litre
- Mix ratio by weight: 3 : 1
- Mix ratio by volume: 5 : 2
- See Data sheet for more details and instructions for use.